10ft container converted to generator store

Breakdown of the Project

10ft x 8ft x 8ft 6″ new build shipping container converted to a bespoke generator store to customer specification.  

We were approached by a leading construction company based in the South East of England who had a requirement for a secure mobile generator store for use during construction projects.  

We took a 10ft new container and fitted out with a steel chequer plate flooring with raised edges to contain any spillages, large heavy-duty louver vents to air flow, personnel steel access door, a 1500L diesel tank with gauge and other fittings. Cable entry points. We supplied and fitted a 20kva diesel generator and fitted with an exhaust stack to the outside.   

The unit was fitted externally in client’s white corporate colours.  

We have long experience in supplying quality generator stores / storage containers throughout the UK. Please contact us for a quotation.  

Conversion breakdown

• 1no. 10ft new build container – 10ft x 8ft x 8ft 6”.
• 1no. steel personnel door with 10-point locking mechanism, installed in the left hand 10ft corrugated panel.
  • Dressed with 50mm box section.
• 1no. 400mm x 1600mm vent installed on the left-hand corrugated panel located towards the cargo doors.
  • An aperture of 1600mm x 400mm was cut from the corrugated panel and dressed with 50mm box section.
• On the right-hand 10ft corrugated panel there was a similar vent installed with 1no. 400mm x 1600mm vent towards the rear of the container.
  • An aperture of 1600mm x 400mm was cut from the corrugated panel and dressed with 50mm box section.
• Internally the container flooring had bunded flooring fitted with 300mm raised edge for any spillages.
• 100mm x 100mm aperture dressed with 50mm box section next to the vent on the right-hand 10ft corrugated panel for use as a cable entry point with a lift up hatch.
• The internal of the container was touched up with matching paint due to weld marks.
• We supplied and fitted a 20kva diesel generator and fitted with an exhaust stack to the outside.
• Resprayed externally to customers specified colour – RAL9010.